Work Vehicle Hazard Detection
Work Vehicle Hazard Detection
Most safety systems see a person and a vehicle separately. This one sees the hazard — the two of them in the same zone, at the same time.
A person in a zone is normal. A vehicle in a zone is normal. Both at once, with the vehicle moving — that's a hazard forming in real time, and Clear Watch recognizes it as one.
Work Vehicle Hazard Detection monitors the condition of areas you define based on whether work vehicles and personnel are present — and, critically, recognizes hazardous combinations rather than isolated detections. You define what constitutes a hazard for each area, such as a person on foot entering while a work vehicle is moving, and the system flags that situation the moment it arises, as a single meaningful event instead of two unrelated ones.
Zones, target types, and the conditions that constitute a hazard are all configurable per site, so the rule matches how each area is actually worked: a yard where vehicles and people are never supposed to mix, a staging zone where they may coexist only when vehicles are stationary, a crossing where movement is the trigger. This is condition-based monitoring — the system understands the state of the work area, not just what's in the frame.
What It Does
Who Uses It
Logistics Yards & Terminals
Yard trucks, hostlers, and workers on foot cross paths hundreds of times a day. Combination-based alerts fire on the near-miss pattern — moving vehicle plus pedestrian in the same zone — before it becomes the incident report.
- Alerts fire on the hazardous combination — moving vehicle and pedestrian together — not on either one alone
- Covers the full yard, including the corners and blind spots no spotter stands in for an entire shift
- Every near-miss logged with video — a leading-indicator record built automatically, shift after shift
Manufacturing Plants
Define hazardous states around loading areas and internal transport routes, so the floor is monitored for the conditions your JSA already identifies as high-risk.
- Hazard conditions mapped directly to your JSA — the system enforces the risks you've already identified
- Loading areas and internal transport routes monitored continuously, including nights and weekends
- Stationary-vehicle rules configurable per zone — a staging area can allow coexistence when equipment is stopped
Construction Sites
Loaders, telehandlers, and dump trucks operate amid crews all day. Detection recognizes when the separation between plant and people breaks down, as it breaks down.
- Separation failures caught in real time — alert fires as the hazard forms, not after the equipment has passed
- Zone boundaries updated in software as the site layout changes — no barriers to move or reinstall
- Covers the hours between toolbox talks when no safety rep is walking the active equipment areas
Warehouses & Distribution Centers
Dock aprons and trailer yards are where struck-by incidents cluster. Automated hazard states cover the outdoor zones that indoor-focused safety programs miss.
- Dock aprons and trailer yards monitored as actively as the warehouse floor inside
- Backing trucks and pedestrians in the same zone flagged — the exact scenario indoor detection can't see
- Peak-period and shift-change windows covered when vehicle and foot traffic overlap most
EHS & Risk Managers
Every hazardous condition is captured with video and a timestamp — a live near-miss log that turns your leading-indicator program from self-reported anecdotes into measured data.
- Every near-miss captured with video and timestamp — objective data replacing self-reported logs
- Leading-indicator trends visible by zone, shift, and vehicle type — training directed by data
- Documented enforcement record supports OSHA compliance, insurance, and incident investigation
How It Works
When a hazardous condition forms — a pedestrian entering while a vehicle is in motion, or whatever combination your site defines — Clear Watch raises the event in real time. Supervisors get an immediate alert, and a live monitoring operator can voice down the workers and driver over on-site speakers while the situation is still a near-miss. Every event is documented with video, giving your safety team an objective record of hazardous conditions and interventions.
FAQs
-
Separate detections tell you a person exists and a vehicle exists. This service recognizes the risk as a combination — for example, a person on foot entering while a work vehicle is moving — so alerts represent an actual hazardous situation, not routine presence.
-
Yes. Zones, target types, and the conditions that constitute a hazard are configured per site, so a crossing, a staging area, and a vehicle-only lane can each carry rules that match how that space is really worked.
-
No — it enforces them. Your traffic management plan defines the rules; Work Vehicle Hazard Detection watches every monitored zone for violations of those rules continuously, including the hours and corners no spotter covers.
Enforce Your Traffic Management Plan On Every Camera, Around the Clock
GET STARTED
Work Vehicle Hazard Detection runs on your existing camera infrastructure, configured per zone to match the rules your site already operates by. No new hardware, no changes to your traffic plan — just continuous enforcement of the separation standards you've already defined.